Once limited to hospital inpatient settings, total joint surgery is increasingly common at ambulatory surgery centers (ASCs) across the US. What is not so common is performing these complex procedures without the benefit of an onsite sterile processing department (SPD). And yet, that is exactly what we have accomplished at a group of Atlanta-area ASCs. For Total Joint Specialists—and potentially others as well—SPD is not a necessary, on-site evil, but a lever for growth and continuous improvement through strategic off-site partnerships.
Moving sterile processing off-site is just one example of the Lean management philosophy that has driven our expansion beyond a single facility. Another is the decision to focus solely on hip and knee replacements. Originating with the Toyota Production System and now ingrained across the economy, Lean emphasizes reducing variation and standardizing work—an easier task with a narrower set of procedures.
Sterile processing is essential for any surgery, but total joint procedures are notorious for stressing capacity with numerous instrument trays, vendor loaner trays, and now robotic-assisted surgical instruments. Add the challenges of meeting manufacturer instructions for use (IFU) requirements, recruiting and retaining sterile processing labor, budgeting for equipment and technology expenses, and devoting valuable floor space to sterile processing activities, and maintaining sterile processing on-site can quickly become cumbersome and costly. Engaging other specialists enables surgeons and other limited ASC staff to focus more on what they do best.
We reported on the beginning of this journey in OR Manager early last year (references, Offsite sterilization fuels onsite efficiency for lean ASCs). Since then, we have added not just two additional surgical centers, but also a centralized facility that handles sterile processing for all four Total Joint Specialists locations. In this article, we’ll report on the next phase of strategic partnership and continuous improvement, including a closer a look at what Lean thinking looks like on an operational level.
Total Joint Specialists’ first ASC opened in 2017 with a minimalist SPD. As detailed in our first article, renovating the department to cope with rising procedure volumes offered an opportunity to test off-site processing at a STERIS facility in Chattanooga, Tennessee, while the work was underway.
However, Lean thinking about SPD began long before moving this essential function off-site (sidebar, An ASC’s journey to offsite sterilization). In 2017, the common consensus was that a single total joint procedure would require 12 trays. However, those familiar with ASC environments knew we could be more efficient.
Starting with the stainless-steel general trays, surgeons and team members began removing unneeded instruments, consolidating one general hip tray and one general knee tray. Further consolidation resulted in just one universal stainless-steel tray for both hips and knees and one standardized power device tray. The team then began working with their vendors to consolidate implant trays, including reducing a five-tray hip system and a six-tray knee system to three trays apiece.
Tray consolidation streamlines surgical procedures by removing redundant instruments, unnecessary complexity, and inefficient workflows. Contracting outside specialists for SPD offers similar benefits on an operational level by enabling onsite personnel to focus more on processes and workflows specific to the OR. Both strategies reflect the same Lean logic: streamline everything that supports the core value-creating activity. In this case, the ASCs can perform more procedures in less time without compromising quality or safety.
Moving SPD offsite worked well enough for our first two surgical centers to design the next two entirely without in-house departments for this core function. With a typical ASC SPD costing $850,000 or more to build and equip, the savings across multiple facilities was substantial. We also avoided the costs of complying with potentially showstopping regulations, such as new Association for Advanced Medical Instrumentation (AAMI) ST108 Water Quality Requirements that had not yet been implemented at the time.
However, the offsite reprocessing center (ORC) in Chattanooga was located nearly 2 hours away. Reducing the cost of transporting instruments required bringing together all partners—consulting firm Surgical Investors and Advisors, STERIS, SteriCUBE, and implant provider Zimmer Biomet—to collaborate on the next phase of innovation, beginning with the construction of a new ORC in Atlanta.
Zimmer Biomet offered to attach the operations to the warehouse of local distributor Joint Medical Concepts. “It makes sense for us to work with STERIS in a complementary sense and have our instrument trays processed at our warehouse,” says Sean O’Hara, Zimmer Biomet VP of Customer Operations. “Having STERIS deliver sterilized trays from our distribution center to the ASC makes it efficient for the provider. That they also can return the trays on the same day of use helps us with inventory and logistics management.”
Having agreed to where the ORC would be established, we focused on how to build it. Speed to market, minimal construction costs, and sterile processing specialization would be critical to success. Prefabricated modular construction enabled attaching the ORC to the Zimmer Biomet warehouse while meeting operational requirements. “We’ve built large brick and mortar ORCs to serve market-based hospital systems, but we knew we needed a more nimble and cost-effective solution for ASCs,” says Roger Pugh, strategic sales director, offsite reprocessing, at STERIS.
The triad was set: The surgeons would focus on the procedures, Zimmer Biomet would provide implants and more streamlined trays, and STERIS would handle the sterile processing. The vision of Total Joint Specialists—sub-specialized surgeons working within a sub-specialized place while support functions were outsourced to outside specialists—was taking shape.
It has been exciting to see this synergy between the implant partner and reprocessing partner after asking for help in finding a win-win-win solution. A key lesson for us—and potentially other ASC administrators as well—is that different vendors are more likely to work together if the provider is willing to contractually commit to business volumes.
A Lean process also helps ensure benefits for all involved. In this case, an onsite lead at each ASC oversees the logistics of sending out the instruments and receiving them from the ORC. “I work as a scrub tech on surgical cases for most of the day, but I also take responsibility for sending offsite the instrumentation we need for the next day’s cases,” says Renee Walker, who fills this role at the Sandy Springs ASC. She adds that she is also responsible for ensuring sufficient back-up instrumentation, which is critical in cases of delayed delivery, tray defects, or other problems (the Chattanooga ORC also acts as an emergency back-up).
Walker is not the only staffer to see her role expand. In fact, no one has lost their job due to offsite sterilization. Rather, those who used to spend time reprocessing instruments have been cross-trained to expand their skills and interests, such as by assisting with surgeries or managing the offsite process like Walker does.
That process has also been streamlined. For example, instrumentation for the next day’s cases are organized by transportation cart so they can be delivered to the offsite reprocessing center as a complete case and returned sterile again as a complete case. Essentially, we build out “case carts” the day before, which the ORC returns sterilized. In the spirit of lean, the entire process has been documented in standard work so anyone who needs to fill in for Renee can follow consistent steps.
For Zimmer Biomet, a Leaner process helps reduce the cost and complexity of managing inventory, O’Hara says. Without offsite SPD, vendor trays were delivered to the surgery center the day before the procedure to allow time for sterile processing. The trays would be used in surgery, washed and decontaminated, and then sit at the facility until they were picked up by the vendor or courier and returned to the warehouse. “Our loaner trays would be utilized once a week in the traditional processes,” says O’Hara. “With the ORC process delivering our trays sterile and then bringing them back the next day, we can increase inventory utilization to two or three uses per week.”
Crucially, none of these benefits come at the expense of patients—at least, not based on the results of Medicare surveys, which all four ASCs passed. We follow the same guidelines as a hospital, and our staff know our processes, especially our new point-of-use cleaning and instrument preparation for offsite transportation. Upon review of those processes, including the offsite sterilization contracts and scope of work documents, auditors were confident in our sterile processing quality.
Overall, our work in Atlanta shows utilizing offsite reprocessing partnerships can fuel ASC growth while addressing sterile processing operational challenges. However, success has required attention to the fine details of eliminating waste and improving quality, matched by a drive to improve support structures and ensure operational efficiencies. Moving forward, we will continue to focus on driving down costs, increasing efficiency, and improving patient outcomes.
—Emily Arce, MSN, RN, is Director of Operations for Total Joint Specialists. She has 14 years of experience in healthcare with responsibility for clinical and operational outcomes. Her experience lies in optimizing surgical workflows, improving patient experiences, and driving strategic initiatives that support both quality care and operational excellence.
—Lacey Dyer, RN BSN, CASC, is VP Clinical Operations of Surgical Investors and Advisors. She has more than 20 years of experience in the ASC industry, including managing surgery centers in all stages of development. Lacey also has practiced nursing and supported clinical care in administration, preop, OR, and PACU.
Editor’s Note: For key lessons learned from Total Joint Specialists’ phased approach on launching and managing offsite sterile processing, see the companion page, Centralized sterile processing: An ASC’s journey to offsite sterilization.
Dyer L. Offsite sterilization fuels onsite efficiency for lean ASCs. OR Manager. August 28, 2024.
Hawkins J, Park C, Mendez R. ASCs in 2024: A Year in Review. VMG Health. January 28, 2025.
Muldoon K. 600+ ASCs with total joint replacements | 2024. Becker’s ASC Review. June 6, 2025.