December 15, 2020

How does lifelong learning in sterile processing affect patient care?

By: OR Manager
Share

Editor’s Note. Developing and sustaining competent sterile processing staff is critical for patient safety, yet there is a dearth of formal educational programs for this function. Whitman Partners, a Portland, Oregon-based specialty search firm dedicated to placing directors of surgical services at hospitals and surgery centers nationwide, asked former surgical services director David L. Taylor III, MSN, RN, CNOR, MAJ, ANC (retired) for his views on what can be done to promote ongoing learning by sterile processing staff. Taylor is an independent hospital and ambulatory surgical center consultant as well as principal of Resolute Advisory Group, LLC, San Antonio, Texas.

David L. Taylor III, MSN, RN, CNOR, MAJ, ANC

Lifelong learning is different from continuing education. It can be best described as a voluntary process aimed at achieving personal and professional fulfillment, and it can be the product of both informal and formal education. On a personal level, it means being self-motivated to improve some aspect of one’s life. Professionally, it inspires a natural progression of learning that takes place over time through interactions with others or the world around us. The pursuit of knowledge can have a profound impact on our lives.

The level of education, experience, and comprehension of sterile processing professionals can be one of the key factors in delivering safe, quality healthcare or making headline news because of negative patient outcomes. Hospital administrators need to understand that the sterile processing department (SPD) is just as important as the other areas of the hospital it supports. Regrettably, far too few hospitals invest in developing their sterile processing staff.

There are many things hospital administrators can do to invest in the lifelong learning of their SPD staff. Investing in a dedicated educator who employs broader educational programs will enhance the skills of both new and tenured sterile processing staff. An educator can:

• Develop competency-based training programs that ensure employees know not only the tasks of the job, but the science behind what they do.

• Enhance cross-training initiatives that give SPD leaders greater flexibility to deploy employees where the greatest needs are for the department to function at a high level.

• Implement a no-cost certification program that builds SPD staff’s confidence and provides recognition for their efforts.

• Support and encourage professional conference attendance (local, regional, and/or national) so SPD staff can network and learn from other experiences.

• Obtain memberships in professional organizations.

All these incentives build on the concept of lifelong learning and can improve employee satisfaction and retention, and reduce the risk of becoming headline news.

 

How does one enter the sterile processing field? What education is required?

Very few formal SPD educational programs exist in the US. A handful of health career high schools have developed official training programs that include didactic, lab, and clinical components.

Most sterile processing personnel entered the field with little or no healthcare background. It is unknown what the education level is for the majority of those working in sterile processing. In my experience as a surgical services leader, a sizable percentage of SPD staff have high school diplomas, followed by those who obtained their GED. A smaller percentage have obtained some college education, and fewer have graduated from college with a degree. Those who have obtained college degrees, in my experience, have left healthcare to pursue different career paths.

Typically, those entering the profession did not plan on a career in sterile processing, with one exception: surgical technologists, who are looking for a career change for various reasons and want to stay in a healthcare-related field. A large majority of SPD staff come from diverse backgrounds and career fields.

I have seen many of the open positions filled by environmental services (EVS) personnel. EVS personnel hired for a position in the SPD can increase their hourly wage, and although the increase is nominal (in some cases, just $0.25-.0.50/hour), it provides a career move they would not have had in their previous department. Those individuals hired into the SPD are often trained on the job. It is common for employees with no educational background or training as preceptors to orient and train new SPD employees. The newcomers are told what to do and how to do it, but never educated on the “why” and science behind what they do.

 

How has technology changed the nature of sterile processing?

When I began my career in surgical services, sterile processing was a part of my daily workflow. At the end of the day, we handled reprocessing for our own instrument sets. If I did not properly reprocess the instruments I used, it would have a negative impact on the department the next day. There was a sense of accountability because we saw firsthand the end results of our work. Over time, the scope and responsibility of sterile processing increased and became a separate department with its own management team, and most SPD staff continue to report directly to the OR. When this transition occurred, hospitals created two distinctive teams, each with separate roles and responsibilities. Because each unit had competing agendas, concerns about quality began to emerge, accountability changed, and it became more difficult to trace issues back to the source.

Another change is that we have more instrument sets than before because of the technological advancements in surgery. When I would circulate a procedure during the 80s, my surgical back table was approximately 6 square feet, roughly 3 feet by 2 feet. Now, it is common for the back table to be 3 feet by 9 feet and be multitiered. Artificial intelligence, machine learning, and the robotics industry are also moving forward rapidly. When these advances transform procedures, they also transform the SPD. But the challenge is that the SPD is usually an afterthought.

What can the C-suite and other administrators do to better support sterile processing?

They should think of the SPD as a separate but integrated unit within surgical services. It is much more than just cleaning instruments. Sterile processing departments handle thousands of reusable surgical instruments and devices—ranging from knife handles and forceps to arthroscopic shavers and fiberoptic endoscopes—daily. And each one of those items requires meticulous care to ensure they are cleaned and sterilized properly for reuse.

The consequences can be disastrous for patients, staff, clinicians, and the organization when the SPD does not have the resources to complete the job as intended. If the SPD cuts corners and a soiled instrument is discovered before it is used on a patient, there could be procedure delays while the healthcare team waits for new instruments, resulting in costly delays.

For example, when you think about how much you can lose or gain per minute in an OR, and when you consider that surgical services contributes upwards of 60% of a hospital’s margin, much can be lost in terms of revenue when the SPD and the OR do not work harmoniously.

Administration will often use OR minutes as a unit of measurement for the SPD’s budget. This often puts the SPD in a tricky situation when productivity in that department is measured. Transferring OR minutes to the SPD does not measure up equally and often puts SPD leaders in a difficult position. What is often not understood are the differences between the surgery department and the SPD. What might take a surgeon an hour in a surgical procedure using 10 instrument sets is 30 hours’ worth of work for the SPD. When you measure the number of FTEs necessary, that equates to 5 employees working 6 hours to reprocess the sets from that single procedure.

It is also critical for administration to include the SPD in the decision-making process when the OR and procedural areas are considering the purchase of new equipment. With dozens of healthcare organizations making headline news for not properly terminally disinfecting and sterilizing reusable equipment and instrumentation, experts agree that there is an increase in the number of cases where improperly processed instruments are reaching the patients, causing significant injury and even death. One of the main reasons is changes in technology. Before the introduction of minimally invasive surgery, most of the instrumentation used in surgery was made of stainless steel and reprocessed with standardized methods. Today, instruments for procedures ranging from colonoscopies to robotic-assisted laparoscopic surgery are more complex and often have movable parts that require disassembly before the narrow channels can be cleaned.

As an example, if administration is considering the purchase of a $2 million robot, they may want to confer with an SPD professional who will know what will be required to clean those robotic arms. Administration may not know that it will take specialized cleaning equipment that can add a significant dollar amount to the initial purchase, as well as an increase in the SPD budget to manage the newest technology.

 

How can a director of surgical services better support sterile processing?

A director should know the intimate details of running an SPD. Having these skill sets can have a profound impact on the overall health and safety of the community, as well as improving the bottom line. With the average cost of running an OR $62/minute, a 60-minute delay can cost a hospital approximately $3,720. Add in a 30-minute delay for missing instruments, and that just increased your loss to $5,580. If this happens just four times a day, a hospital could be losing $669,600 a month. Multiply that by a year, and the losses could be in the millions of dollars.

 

What kinds of certifications are available for sterile processing?

I know of two certification programs: IAHCSMM (International Association of Healthcare Central Service Materiel Management) and CBSPD (the Certification Board for Sterile Processing and Distribution). I have experience working with excellent people who have had either certification, and they do quite well in their careers. However, in the last few years I have found that IAHCSMM is becoming the industry leader in SPD because they generally have the most engagement in the SPD community.

Unfortunately, only four states (Connecticut, New Jersey, New York, and Tennessee) have certification requirements. Obtaining these buy-ins from legislators has been an uphill battle that has taken years.

It is difficult to understand why the healthcare industry and legislators are not making certification requirements a national standard. When you consider that nearly every state requires barbers, hairdressers, tattoo artists, and dog groomers to have a license, certainly legislators would think individuals reprocessing critical items that enter body cavities would at least require a certification. Sterile processing requires unique skills that at present cannot be done by machines alone and is often looked down upon and not seen as important. My view is the SPD is one of the most important departments of any hospital or ambulatory surgery center.

 

How do tuition costs and community access, particularly in rural areas, affect the advancement of sterile processing?

Tuition costs and access to formal learning environments are often out of reach for most people seeking a career in sterile processing. Living in a rural area makes it even harder. Across the US, there are currently 1,844 rural hospitals, and 1 in 4, or 25%, are at risk of closing. Most SPD employees make minimum wage and cannot afford tuition costs unless they are subsidized by their employers. Because so many SPD technicians are trained on the job, healthcare institutions are not investing in the lifelong learning of their SPD employees.

 

What are your recommendations for lifelong learning and educational opportunities in sterile processing?

There is a lot of discussion about creating sterile processing programs. A few colleagues and I are brainstorming ideas for this. A major challenge is the large amount of capital required to develop these programs—to hire and train staff, in addition to purchasing the equipment (facility, various sterilizers, washer disinfectors, instrument sets, and other related equipment)—to outfit a training center, with little data to demonstrate financial feasibility.

Hospitals are desperate for trained staff, but who is going to pay for it? In parts of the country, eligible employees can make upwards of $15/hour working in the fast food industry, and hospitals barely pay minimum wage. Working in the SPD is not without risks. All those risks for so little monetary reward do not inspire people to pay for an education that will not increase their annual income. ✥

Join our community

Learn More
Video Spotlight
Live chat by BoldChat