June 2, 2012

Practice now applying the new ASC quality codes

While the deadline for beginning to report quality measures on Medicare claim forms is not until October 1, 2012, ambulatory surgery centers (ASCs) can start practicing. On April 1, 2012, the Centers for Medicare and Medicaid Services (CMS) released a set of reporting codes for the first 5 measures. The manual for the ASC quality reporting program was issued on May 1, 2012.

It’s a good idea to start now, according to Naomi Kuznets, PhD, senior director of The Institute for Quality Improvement at the Accreditation Association for Ambulatory Health Care (AAAHC).

“Becoming familiar with the process is very important,” Kuznets says. “The more familiar ASCs are with reporting, the easier it will be [when it becomes mandatory].”

Besides, she notes, implementation will not be as simple as inserting a code.

“The codes seem straightforward,” Kuznets says, “but there may be exclusions.”

The implementation process begins with instructing vendors to update claims software to accept the new codes. Electronic claim forms will have a new space for inserting the codes. Staff will need to learn the new codes and how to apply them.

 

A joint effort

The new codes are the product of industry efforts to establish measures appropriate for outpatient surgery facilities, with CMS adopting most of the recommendations. The ASC Quality Collaboration (ASC QC), a consortium of ASCs, professional associations, and accrediting organizations including AAAHC, developed the measures and criteria.

It was always about the patients, according to ASC QC executive director Donna Slosburg, BSN, LHRM, CASC.

“I feel that the quality reporting program is a great opportunity for ASCs to demonstrate their high levels of performance with the public,” she says. “The ultimate beneficiaries of our efforts will be our patients.”

The new codes cover patient burns, patient falls, wrong-site surgery, hospital transfers, and timing of prophylactic antibiotics. The table on page 27 shows the codes for events related to these measures.

Two originally proposed measures, hair removal method and antibiotic selection, were eliminated, but CMS plans to add another 3 in the future.

 

Safe surgery checklist

The CMS specifications manual indicates that ASCs that used a safe surgery checklist based on accepted standards of practice at any time during 2012 can answer “yes” when they report whether they used a safe surgery checklist during the year, the ASC Association reports. The checklist measure affects payments starting in 2015.

Previously, CMS had indicated ASCs would be able to answer “yes” only if they had a safe surgery checklist in place on January 1, 2012.

In 2016, ASCs will report on their procedure volume for certain specialties and on vaccination of staff against influenza.

The National Quality Forum, a national standards organization, endorsed the measures before they were submitted to CMS.

 

New quality codes explained
To use new quality codes, ASCs should instruct their software vendors to add a space labeled “G-code” for inserting the new codes. Following a procedure, coders will have at least 2 choices for each eligible patient and for each quality measure. The exception is antibiotic timing, where there is a third choice: where no antibiotic was given because none was ordered.
The codes and short definitions as outlined by CMS:
Measure G-code
No reportable events for this patient G8907
Patient burn G8908
No burn G8909
Patient fall G8910
No fall G8911
Wrong site, side, patient, procedure, or implant G8912
No wrong event G8913
Hospital transfer G8914
No transfer G8915
*Antibiotic ordered and given on time G8916
Antibiotic ordered, not given on time G8917
Antibiotic not ordered G8918
*Only when one or more of the following medications is ordered should this measure be reported: Ampicillin/sulbactam, aztreonam, cefazolin, cefmetazole, cefotetan, cefoxitin, cefuroxime, ciprofloxacin, clindamycin, ertapenem, erythromycin, gatifloxacin, gentamicin, levofloxacin, metronidazole, moxifloxacin, neomycin, vancomycin
Source: CMS.

 

When reporting begins

ASCs could start using the new codes to report on services provided beginning April 1, 2012. After October 1, 2012, ASCs that fail to use the new codes for at least half of the 5 measures will be penalized in 2014 with a 2% reduction in that year’s Medicare payment update. CMS provides additional details in the CY2012 OPPS/ASC Final Rule in the Federal Register and on its website (https://www.cms.gov).

ASC QC provides an implementation guide for using the quality measures at www.ascquality.org.

ASCs may register to receive regular e-mail updates from CMS at www.cms.gov/center/asc.asp.

 

Deciding what to report

As Kuznets notes, it takes some research to determine what to enter on a particular patient’s Medicare claim form.

The first step is to determine if a patient is eligible for the measure. In the case of prophylactic IV antibiotic timing, the coder should ask:

• Did the patient complete the registration process upon entry? (This defines admission.)

• Was there a preoperative order for an IV antibiotic?

• Is that antibiotic on the list of medications specified by CMS for reporting?

If the answer to any question is “no,” the patient is not eligible.

In another example, for the “patient fall” measure, a question would be, “Did the patient fall within the facility?” Even if a scheduled patient fell but before entering the facility, that incident would not be eligible for reporting. Also ineligible are incidents where patients are pushed or knocked down deliberately, the ASC QC guide explains.

In the case of patient burns, eligibility is limited to injuries from any of 6 methods: scalds, contact, fire, chemical, electrical, or radiation.

For the hospital transfer measure, the patient is eligible if he or she goes directly from the ASC to an acute care hospital or emergency room whether by ambulance or private transportation. But if the patient goes home and later enters a hospital for reasons related to the surgery, that event should not be reported.

For wrong-site surgery, the definition is fairly comprehensive, yet there are still exclusions. For example, injection of a local anesthetic in the wrong place is reportable; placing anesthetic drops in the wrong eye is not.

 

Log each incident

Next, record the data for each eligible patient. The ASC QC guide suggests keeping a log for each patient for each measure. For example, the log for prophylactic IV antibiotic timing would include the following entries:

• date of service

• patient identifier

• antibiotic ordered

• infusion start time

• procedure start time (initial incision)

• elapsed time from infusion to incision

• timely administration? (If elapsed time is 60 minutes or less, enter “yes.”)

If the patient needs more than one antibiotic in a single procedure, use a separate line for each antibiotic. Enter a positive report only if all are administered within the time limit.

If no antibiotic was ordered, do not make an entry in the log.

 

Putting it together

The quality measures will serve ASCs in 2 ways: On a national scale, they will demonstrate to patients, insurers, and the public the quality of care available at ASCs. At the facility level, they will tell an ASC where it excels and where it needs to improve.

The ASC QC guide offers benchmarks and computation methods for each measure and suggests how ASCs can use their scores to chart improvement goals.

For example, the following information from the guide shows how to track hospital transfer rates:

• Measure type: Outcome (other measures track processes)

• Intent: Record all hospital transfers following ASC discharge

• Numerator/denominator: The number of transfers divided by all ASC admissions

• Inclusions/exclusions: No post-discharge hospital transfers are excluded

• Data sources: Medical records, incident reports and variance reports

• Definitions: Admission means completion of registration; discharge means leaving the ASC; transfer means going directly to an acute care hospital.

“The need for transfer/admission is an unanticipated outcome and could be the result of insufficient rigor in patient or procedure selection,” the guide explains. Another reason to track transfers is that some states are considering requiring such reports.

For the industry as a whole, the measures will provide needed research, the guide says, into the performance and outcomes of ASCs, which until now have not been studied consistently. In addition, by standardizing definitions and reporting methods, the measures will make it easier for ASCs to benchmark their own performance. ❖

 

The CMS specifications manual is available on ASCA Connect at www.ascaconnect.org/CONNECT/Communities/Resources/ViewDocument/?DocumentKey=173c76a5-60f8-43fa-a005-9299331b7881

Join our community

Learn More
Video Spotlight
Live chat by BoldChat