Sterile Processing What exactly is required to prepare instruments for transport to the decontamination room after a surgical procedure? Point-of-use cleaning, which may also be referred to as precleaning, has been used to describe instrument preparation at the point of use after a surgical procedure. But both point-of-use cleaning and precleaning have…
Does it really matter if surgical instruments are submerged in cleaning solution when technologists or nurses scrub them after a case? Is there a reason for the 3-foot separation between dirty and clean areas? Do germs stop at the red line? During the COVID-19 pandemic, much attention has been focused…
Many of today’s medical facilities have been modernized, but some still have areas of aging infrastructure. The central sterile processing (CSP) department at Cleveland Clinic Mercy Hospital in Canton, Ohio, is one such example. The original Terrazzo floor from when the facility was built in 1953 had become hazardous. The…
Amendments have been added to the Association for the Advancement of Medical Instrumentation (AAMI) standard ANSI/AAMI ST79, Comprehensive Guide to Steam Sterilization and Sterility Assurance in Health Care Facilities. The standard, which is used in healthcare facilities to guide their sterilization processes, is considered a useful resource to promote best…
The COVID-19 pandemic has underscored the importance of respiratory protection in healthcare settings and in the community. Healthcare workers at high risk of infection need the most effective respiratory protection, and not all surgical masks and respirators are alike. Checking for proper fit, donning and doffing correctly, and following manufacturers’…
The Joint Commission stopped doing most onsite surveys and reviews from March 16 to May 31, 2020, in response to the COVID-19 pandemic. During that time, they developed processes for conducting offsite or virtual events, and as of mid-December, more than 1,200 offsite surveys and reviews had been conducted across…
Implants are foreign bodies, and they increase the risk of a surgical site infection. Processing implants requires strict adherence to the required steps because implants have sustained contact with sterile tissue. An implant is defined as a device that is placed into a surgically or naturally formed cavity of the…
The financial impact of COVID-19 on healthcare providers has been considerable. With experts predicting that half of all US hospitals would be operating in the red by the end of 2020, healthcare leaders have had to seek multiple ways to cut costs. The expansion of single-use medical device (SUD) reprocessing…
Now that facilities are returning to performing urology cases, what should staff be aware of regarding COVID-19 and urology in general? This was the question Lane Jacobs, an expert in global product solutions for Boston Scientific, Marlborough, Massachusetts, asked Cori L. Ofstead, MSPH, president and chief executive officer, Ofstead &…
Editor’s Note. Developing and sustaining competent sterile processing staff is critical for patient safety, yet there is a dearth of formal educational programs for this function. Whitman Partners, a Portland, Oregon-based specialty search firm dedicated to placing directors of surgical services at hospitals and surgery centers nationwide, asked former surgical…
